1. When charging the UPS battery, care should be taken to prevent the phenomenon of excessive current and overcharging. KSTAR UPS, KSTAR power supply, KSTAR UPS power supply, KSTAR uninterruptible power supply, KSTAR battery, KSTAR battery, KSTAR official website installed batteries need to adjust the rated voltage of the generator, and For batteries that are charged between charging, it is necessary to control the charging current and charging time.
2. When using, it is necessary to prevent the occurrence of sparks, and the connection between the joint of the wire and the electric pile must be firm. During maintenance, it is necessary to ensure the welding quality of the plate group.
3. Libert Cloud Monitoring “Smart Battery” is a new type of lead-acid battery built into the monitoring module. The data can be viewed on-site or uploaded to the cloud platform. Both the PC and mobile APP terminals can obtain data information through the cloud platform. Battery abnormality alarms are also provided.
4. When used under low temperature conditions, the starter cannot be used continuously. The combination time of the starter should not exceed 5 ~ 10S, and at the same time, it is necessary to maintain the interval time of 10S ~ 15S to start.
5. During operation, in order to make the generated gas discharged from the vent hole of the liquid filling port in time, so that the internal air pressure will not be too high, the liquid filling cap needs to be kept in a tightened state, and the vent hole needs to be cleared at the same time.
Post time: Aug-15-2022
